Category Archives: Engineering

Drilling String Design for Deep Well Drilling in Niger Delta

Drilling String Design for Deep Well Drilling in Niger Delta ABSTRACT The design of the drill string was thoroughly investigated in this project research write up. Particular reference studies were carried out in order to understand the basic Engineering requirements, principles and techniques required in the design of the drill string as a vital tool […]

Also posted in Petroleum Engineering | Tagged , , | Leave a comment

Fibre – Ration on the Mechanical Properties of Natural Fibre Composite

Effect of Ration on the Mechanical Properties of Natural Fibre Composite (Polymer in Use HDPE) ABSTRACT The effect of ratio on the mechanical properties of Usoro (natural) Fiber composite had been studied. The ratio of the fiber to the HDPE was varied in order to obtain the best ratio that will improve the mechanical properties […]

Also posted in Chemical Engineering | Tagged , | Leave a comment

Road – Causes of Road Pavement Failure

Road – Investigation into the Causes of Road Pavement Failure, along New-Market Express Road.   ABSTRACT Road- It is the objective of this research work to provide the basic and fundamental instruction on the causes of road pavement failure-using Enugu New -Market express road as a case study. The road which has been constructed for […]

Also posted in Civil Engineering | Tagged | Leave a comment

Formulation, Production and Characterisation of Automotive Paints

Formulation, Production and Characterisation of Automotive Paints ABSTRACT The production of high quality automotive paint from available raw materials was undertaken in which many research labs and factories were visited. The formulation and production were carried out and the characterisation tests corresponded to NIS 574: 2008 standards (specification for automobile refinish paints). Two samples of […]

Also posted in Chemical Engineering | Tagged | Leave a comment

Palm Kernel Oil Pre-Processing Method- Yield, Characteristics of Palm Kernel Oil Biodiesel

Effect of Palm Kernel Oil Pre-Processing Method on the Yield and Characteristics of Palm Kernel Oil Biodiesel ABSTRACT This research work on the effect of palm kernel oil pre-processing method on the yield and characteristics of palm kernel oil biodiesel. Trans-esterification were carried out using the palm kernel oils extracted from the un-boiled fermented palm […]

Also posted in Chemical Engineering | Tagged , | Leave a comment

Alkaline Pretreatment of Lignocelluoosic Biomass to Produce Bioethanol

Optimization of Alkaline Pretreatment of Lignocelluoosic Biomass to Produce Bioethanol ABSTRACT Pretreated of sugarcane baggase using Na0H for the bioethanol production was optimized. The process variables studied were time, temperature, Na0H concentration and substrate concentration. Two level and four factorial design were developed using Design expert software. The experiment was carried out based on the […]

Also posted in Chemical Engineering | Tagged , , | Leave a comment

Clay -Effect of Process Variables on the Absorptive Abilities

The Effect of Process Variables on the Absorptive Abilities of Acid Activated Clays (Ibusa and Karaworo)  ABSTRACT The demand for alternative local raw material to improved quality of crude palm oil necessitated the need for  this research, “the effect of process variables on the adsorptive abilities of Ibusa clay in Delta state and Kwaraworo clay […]

Also posted in Chemical Engineering | Tagged , | Leave a comment

Contamination Level -Ground and Surface Water in Nigeria

Contamination Level of Ground and Surface Water in Nigeria –A Case of Warri and Environs (Evaluation of the Physico-Chemical and Microbial Qualities of Ground and Surface Water in Nigeria –A Case of Warri and Environs) CHAPTER ONE INTRODUCTION GENERAL INTRODUCTION Water is the most common liquid on our planet, vital to life forms. Water can […]

Also posted in Chemical Engineering, Faculty of Natural Science | Tagged , , | Leave a comment

Design and Fabrication -Laboratory Greywater Recycling Plant

Design and Fabrication of a Laboratory Greywater Recycling Plant CHAPTER ONE INTRODUCTION 1.0 Background of Study ……. ….incomplete……. 1.1  Problem Definition In Awka, water supply has been a major problem because all the three existed public water supply schemes operated by Anambra State Water Corporation are in deplorable states. These public water supply schemes are […]

Also posted in Chemical Engineering, Mechanical Engineering | Tagged , | Leave a comment

Chemical Plant Design

Chemical Plant Design – Production of 4-Hydroxy 2- Butanone by the Dehydrogenation of 2, 4- Hydroxy Butanol CHAPTER ONE INTRODUCTION 1.1 Background of Study This is a chemical plant design project for the production of 4-hydroxy 2- butanone by the dehydrogenation of 2, 4- Hydroxy butanol. In Other words, it is a chemical Plant design […]

Also posted in Chemical Engineering | Tagged , , , , , | Leave a comment